Description
PRODUCT INTRODUCTION
Sodium Bicarbonate 99% Industrial Grade is a clean white crystalline powder with stable alkalinity and good water solubility. In swimming pool applications, it is mainly used to raise total alkalinity and help buffer pH fluctuations.
The product is also used in selected industrial water-treatment, chemical-processing, environmental-treatment and general manufacturing applications where mild alkalinity adjustment or acid neutralization is required.
EASTKING supplies export-grade Sodium Bicarbonate with controlled assay, moisture, chloride and appearance. Each shipment can be supported with a batch-specific Certificate of Analysis, Technical Data Sheet and Safety Data Sheet.
KEY PRODUCT FEATURES
| 99% Minimum Assay
Consistent sodium bicarbonate content supports stable alkalinity adjustment and reliable industrial use. |
| Pool Alkalinity Control
Commonly used to increase total alkalinity and help reduce rapid pH fluctuations in swimming pool water. |
| Good Water Solubility
The fine crystalline powder dissolves readily, supporting convenient preparation and dosing. |
| Standardized Commercial Grade
A largely standardized inorganic chemical that can normally be supplied according to defined purity and impurity limits without application-model selection. |
| Simple Export Handling
Standard commercial material is normally transported as non-dangerous goods, subject to the actual supplier documentation. |
TYPICAL SPECIFICATION
| Test Item | Typical Standard |
| Sodium Bicarbonate, NaHCO₃ | ≥99.0% |
| Loss on Drying | ≤0.20% |
| pH Value (10 g/L Solution) | ≤8.5 |
| Chloride, as Cl | ≤0.40% |
| Whiteness | ≥85 |
| Ammonium Salt | Pass Test |
| Appearance | White crystalline powder |
Important: The above values are representative of typical industrial-grade export specifications used by ordinary Chinese manufacturers. The final specification and actual test results must be confirmed by the batch COA supplied with the shipment.
MAIN APPLICATIONS
- Swimming Pool Water Treatment
- Increase total alkalinity in swimming pools and spa water
- Help stabilize pH and reduce rapid pH fluctuations
- Support balanced water conditions and improve swimmer comfort
- Suitable for pool chemical distributors, maintenance companies and private-label blending
As a practical reference, approximately 1.68 kg of pure sodium bicarbonate per 100 m³ of water raises total alkalinity by about 10 mg/L as CaCO₃. Actual dosage should be based on water testing, product purity and the target alkalinity range.
- Industrial Water Treatment and pH Buffering
- Mild alkalinity adjustment in selected process-water systems
- Buffering support where controlled pH correction is required
- Neutralization of acidic process streams under properly designed operating conditions
The customer should determine final dosage according to water chemistry, process design and treatment targets.
- Flue Gas and Environmental Treatment
- Dry sorbent injection and selected acid-gas neutralization applications
- Reduction of acidic gases such as HCl and SO₂ in suitable systems
- Environmental treatment processes requiring a sodium-based alkaline reagent
Special activated or milled grades may be required for high-performance flue-gas treatment. Standard export-grade material should not automatically be described as suitable for every system.
- Chemical Manufacturing
- pH adjustment and buffering in chemical processes
- Reactive intermediate in selected chemical synthesis
- Acid neutralization and process-control applications
- Detergent and Industrial Cleaning
- Alkalinity control in cleaning formulations
- Mild abrasive and buffering applications where the specified grade is suitable
- Industrial cleaning and maintenance formulations
- Textile, Leather and Other Industrial Uses
- Selected textile-processing and leather-processing applications
- Fire-extinguishing powder formulations
- General industrial utility and neutralization uses
Food, feed, pharmaceutical and other regulated applications require the corresponding qualified grade and compliance documents. This page covers industrial / technical material only.
WHY CHOOSE EASTKING
| Consistent Product Quality
Each batch can be inspected for assay, moisture, chloride, pH and appearance before shipment. |
| Complete Export Documentation
COA, TDS, SDS, commercial invoice, packing list and other agreed export documents can be supplied. |
| Flexible Industrial Packaging
Standard and customized packaging options are available for importers, distributors and industrial users. |
| Reliable Container Supply
Stable sourcing and container-loading arrangements support repeat orders and long-term supply programs. |
| Sample Support
Representative samples can be supplied for specification confirmation before bulk purchase. |
PACKAGING
Standard Packaging
- 25 kg PP woven bag with PE inner liner
- 25 kg kraft paper bag with moisture-resistant inner liner
- 500 kg or 1,000 kg jumbo bag upon request
Customized Packaging
- Neutral packaging
- Customer brand printing
- Customized shipping marks
- Palletized packing
- Shrink-wrapped export pallets
A typical 20-foot container can normally load approximately 25-27 MT without pallets, subject to bag type, loading method, destination-country weight limits and shipping-line restrictions.
STORAGE AND HANDLING
Store in a cool, dry and well-ventilated warehouse. Keep the packaging tightly sealed and protect the material from moisture, contamination and direct sunlight.
Keep separated from acids and incompatible chemicals. Contact with acids can release carbon dioxide gas. Avoid excessive dust generation and use suitable eye and respiratory protection when required by the SDS.
SAFETY INFORMATION
Standard commercial Sodium Bicarbonate is normally not regulated as a dangerous good for IMDG sea transport. It is non-combustible and has a comparatively low transport risk, but proper industrial handling and storage practices are still required.
The material may cause temporary irritation if dust contacts the eyes or respiratory tract. Personnel should follow the current SDS and all applicable occupational safety requirements.
FREQUENTLY ASKED QUESTIONS
Is Sodium Bicarbonate 99% a dangerous good?
Standard commercial solid Sodium Bicarbonate is normally not regulated as dangerous goods for IMDG sea transport. Final determination must be based on the actual supplier SDS and transport identification report.
What is the main pool application?
It is mainly used to increase total alkalinity and help stabilize pH in swimming pool and spa water.
Is this product the same as a pool disinfectant?
No. Sodium Bicarbonate is a water-balance chemical, not a chlorine disinfectant. It does not replace TCCA, SDIC or calcium hypochlorite.
Does the product require model selection?
Normally no. The customer mainly confirms grade, purity, impurity limits and packaging. The application dosage should be determined according to the actual water test results.
Can EASTKING provide a batch COA?
Yes. Each shipment can be supplied with a batch-specific Certificate of Analysis.
Can the packaging be customized?
Yes. Neutral packaging, customized printing, shipping marks and palletized packing can be arranged according to order quantity.
Is this product suitable for food applications?
This document covers industrial / technical grade material. Food use requires a separately qualified food-grade product and the applicable compliance documents
REQUEST A QUOTE
Looking for a reliable Sodium Bicarbonate 99% supplier from China? Please provide the following information:
- Required grade and specification
- Final application
- Packaging requirement
- Required quantity
- Destination port and country
EASTKING will provide the appropriate product specification, export documents and commercial quotation.
WEBSITE AND SEO COPY
| Website Element | Recommended Copy |
| Recommended Page Title | Sodium Bicarbonate 99% Supplier from China |
| SEO Title | Sodium Bicarbonate 99% | Pool Alkalinity Increaser Supplier |
| Meta Description | EASTKING supplies Sodium Bicarbonate 99% for pool alkalinity adjustment, pH buffering and general industrial use. Stable quality, export packaging, COA, TDS and SDS available. |
| Short Product Description | High-purity Sodium Bicarbonate 99% for swimming pool alkalinity adjustment and industrial buffering applications. Stable quality, non-dangerous transport classification in normal commercial form and flexible export packaging. |
PublishingINFORMATION TO CONFIRM BEFORE WEBSITE PUBLICATION
- Confirm whether the factory standard assay is stated as ≥99.0% or ≥99.2%.
- Confirm the factory chloride limit and whether whiteness is included in the routine COA.
- Confirm the final standard packaging: PP woven bag, kraft paper bag, jumbo bag, or available combinations.
- Confirm the actual transport identification report shows non-dangerous-goods status for the supplied product.
- Replace all typical values with the actual fixed factory specification before publishing the final commercial page.
Reference note: GB/T 1606-2025, Industrial Sodium Bicarbonate, became effective on 1 January 2026 and replaced GB/T 1606-2008. The website specification should nevertheless follow the actual manufacturing factory and batch COA.
Reviews
There are no reviews yet.